Bundle Infinity Edge 2mm - Garden Edging - Corten (Rusty Weathering Steel)

Bundle Pack - 57.6m or 86.4m 
Everything you need @10%-OFF

Introducing our newest edging solution - Infinity Edge

This product is for those that require a seamless solution, as the name suggests, this edging once joined together can run forever with no visible joiners or interruptions. 

We achieve this by rolling a top edge in the lengths, this not only creates a strong, straight length, it also offers the ability for the joiners to be on the inside of the edging solution. 

The caveat with this range 
It requires more work for installation - We are upfront about that. We can be, because we offer alternative solutions which we manufacture ourselves in our Australian factory.

To install this edging product, we provide you with specialised galvanised self-drilling screws. You simply need to butt two lengths (or more) of Infinity Edge together, insert a peg on the back between the two lengths and screw the bottom edge. 
This creates a rigid length with a peg to install in-ground. 

Whilst more complicated during install, it is the only way (without welding) to achieve a seamless edging result. 
The screws which are installed are located on the bottom edge, once the edging is installed, these are below ground and not visible.
 
What can be done with this Edging?
 

• Garden Edging - Curved or Straight
• In-Ground division between grass, garden beds or other materials.
• Planter boxes
• Lawn edging (a clean attractive straight or curved edge)
• Safety solution for younger children - The rolled top means no exposed sharper edge

They can be cut to your required length with a grinder and a cutting wheel, or we can cut to your exact length. This means all you need to do is assemble. 
As this product butts up to each length for continuity, the cuts you make need to be nice and straight. 

Need some help with planning your edging, or need help calculating lengths and joiners etc? 
Please Contact us, upload your plan and we will calculate the lot for you and send back a quote inclusive of everything to get your project done.
Our products are Australian made to last, you only want to do it once. 
 

Buying Bulk? Have a look at our Bundle Packs

We ship Australia Wide - Direct from the manufacturer, no middle-man.
 

• Note: These are cut raw (silver metal finish) - Over time (a few weeks) you will see the silver finish rust over with a beautiful even rust coating. Once this happens the material is sealed and stops the rust process.

1. Grab your Tape measure 
   Measure up the length of your garden beds, add all of these measurements together and you will have your Total Lineal Meter requirement. 
   Then divide this total number by 2.4 (The length of our edging pieces). 
   Eg. 30-meters divided by 2.4 = 12.5 lengths required (we would recommend rounding up to 13)
2. Pegs/Joiners
   The Infinity Edge utilises this product for Joining lengths & as pegs to stabilise the edging into the ground.
3. Corners
   We pre-bend sections of Infinity Edge in External & Internal corners, this gives you a perfect, crisp finish from our large CNC presses.
4. After order support! 
   If you order edging from us and start your project and realise you didn't buy enough pegs or joiners, simply call or send us an email. 
   We will post these additional parts to you express.
   
   Still confused? Scribble your plan onto a piece of paper, take a photo - We LOVE pictures of your scribbles & your spaces (truly, we could be a little strange). 
   Hit the Contact-Us button and attach your picture and we will help you work out your requirements, we can email you a quote, all inclusive - You just need to make payment by clicking the link and a few days later a truck arrives with your pallet of edging, ready for installation!

Can this be flexed into curved garden beds?

Yes, whilst the Infinity Edge is quite rigid, it still has some flex to allow for curves. 
If you are after a tighter curve, you can simply cut some relieve cuts in the top rolled edge (on the back). 
If you need to create a very tight curve, we can roll these on our machines.
This is the biggest advantage of dealing with the manufacturer - If you need customisation, we can do it.

What about around a tree? a circle?
Yes, circles are possible - In this situation we simply recommend the use of our pegs, secure an end and start curving whilst hammering pegs in to keep it in place. After you have created your radius, you can hit the edge into the ground and remove excess pegs.
For a circle under two-meters diameter, please have a look at our pre-rolled tree rings Here

Product Details

• 2mm Corten Weathering steel (Develops Rusty Patina which seals the product & protects from rusting through)
• High Tensile Steel - 350mpa grade, this is as strong as it gets.

Length - 2.4 Meters (2400mm) Long, Each Strip.

Height - 130mm, 220mm or 300mm
Thickness - 2mm

Flat-Rate shipping

>70kg - $99 Metro, $199 Regional, $299/$399 Remote Shipping

<70kg - $49 

We refuse to sell inferior 1.5mm lightweight product. Shipping well made heavy product is expensive, we assume why its unpopular. 
Economies of scale allow us to offer these discounted shipping rates. 

How does this get delivered?

For Palletised Orders >70kg

We strap and wrap your order on a pallet (skid) and we send it (we've shipped all over Australia).
Our carrier will arrive with a tail lift and pallet jack, they will unload it and wheel it onto your property, this means our carrier will require a hard surface to unload. They will NOT leave the package on the street, footpath or any other area deemed unsafe. 
We have great carriers, these are real-people and they want to help, but please be realistic. They can't risk their health to manually lift items into locations.

For Hand-Parcel orders <70kg
These items will be wrapped and sent via a hand parcel delivery. 

Questions? Shipping costs not displaying correctly?
Please Contact us

Shipping Policy
https://www.coreearthdesigns.com.au/policies/shipping-policy

Steel Product & Safety

Please be mindful of safety when utilising steel edging in your garden. Particularly if you have young children - being children! 
Having a substantial amount above ground is how we have designed our edging to be utilised. This creates a visible barrier for people & animals navigating your garden. 
During the production of steel product, edges can be sharp. Whilst this sharp edge is diminished over-time (Rusting process), it is also possible to quickly run a 'flap-disc' grinding wheel across the edge to remove any sharp edges.

If you need a very safe option around younger children, we recommend our Infinity Edge product.
This is also the safest option as an in-ground divider as it has no sharp edges on top.